Featured image of post STM32-F446RE Robot Mission Control Board

STM32-F446RE Robot Mission Control Board

A compact, highly-integrated STM32F446RE controller engineered for Eurobot, supporting 18 servo channels, 4 optocoupler-isolated MOSFETs, and multi-sensor interfaces.

Project Overview

This is a custom-designed mission control board engineered for competitive robotics (Eurobot), working in harmony with our self-made XL4015 buck converter array.

Commercial development boards (such as the STM32 NUCLEO-F446RE) are bulky and laden with unneeded components, making them ill-suited for strict dimensional constraints. To optimize space utilization and eliminate wiring fragility, I developed this compact 80mm x 86mm mission controller.


Technical Specifications

  • Microcontroller: STM32F446RE (180MHz ARM Cortex-M4, 512KB Flash, 128KB SRAM)
  • Dimensions: 80mm x 86mm
  • Servo Outputs: 18 individual PWM servo channels
  • High-Power Actuator Control: 4x MOSFET channels (LR7843 with PC817 optocoupler isolation)
  • Pressure Sensor Ports: 3x MPXV7007DP differential pressure sensors
  • Distance Sensor Ports: 2x VL53 ToF distance sensors
  • PCB Architecture: 4-layer stackup with all components mounted on the top side for cost-effective single-sided PCBA manufacturing
  • Programming Interface: ST-Link V2 header

Schematic & 4-Layer High-Density Layout

All critical routing—including high-speed crystal oscillator traces, analog pressure lines, and heavy-current switching circuits—was routed manually to guarantee noise immunity.

Schematic 4-Layer PCB Layout

Click on any image above to open the full-screen PhotoSwipe lightbox for high-resolution inspection.


Fabrication & Prototyping

Final production units were manufactured by JLCPCB PCBA, while initial verification prototypes were hand-assembled via hot-plate reflow soldering to validate circuit operation and footprint clearances.

PCB Top View PCB Bottom View Prototyping Selfie


Key Advantages & Impact

  • Form Factor Reduction: Shrinks volume by over 60% compared to off-the-shelf NUCLEO boards stacked with expansion shields.
  • Rock-Solid Reliability: Automated SMT assembly combined with optocoupled noise isolation prevented actuator EMI interference throughout the competition season.
  • Direct Modular Interfacing: On-board custom terminals connect directly to robot actuators, eliminating messy loose wiring.

Open Source Repository

The complete schematic and PCB layout design files (EasyEDA Pro) are open source:

comments powered by Disqus
Wei-Lun (Allen) Chang (張瑋倫)
Built with Hugo
Theme Stack designed by Jimmy